Heat exchangers and pressure vessels transfer energy and store media under pressure. Both groups are safety-relevant — sizing, material and approval therefore belong together.
by eazytech
The 1/2" steam heating coil heats process air using steam as the heating medium. The heat exchanger consists of aluminum fins mechanically connected with copper tubes; the casing is made of galvanized steel sheet with...
In stockShips in 1–3 business days
12340
by eazytech
Evaporator coil with a copper-tube fin block for installation in dry-cleaning machines. The coil is integrated into the refrigeration circuit via two connections with 1/2" thread.Technical data Heat transfer surface: ...
In stockShips in 1–3 business days
12322
by eazytech
Evaporator heat exchanger made of copper and aluminium for the cooling circuit of model B-440. The copper pipes are routed in a meandering pattern through the aluminium fins, two connection stubs with 1/2" external th...
In stockShips in 1–3 business days
12577
by eazytech
Finned heat exchanger coil in helical tube design for use as a condenser or evaporator in the refrigeration circuit. Two connection stubs with 1/2" thread integrate the coil into the piping.Technical features Design: ...
In stockShips in 1–3 business days
11751
by eazytech
The refrigerant recovery cylinder is a vertical pressure vessel for liquefying refrigerants during recovery from refrigeration systems. At the top of the cylinder are two ball valves and a lateral connection port for ...
In stockShips in 1–3 business days
10002
by eazytech
Steam-heated heating coil (heat exchanger) for EazyClean Smart machines. The copper and aluminium coil transfers the heat of the steam medium to the process air via a fin structure.Technical Features Material: Copper ...
In stockShips in 1–3 business days
11689
by eazytech
The steam heating coil heats the process air in dry cleaning machines of the B-250, B-300 and B-440 series. The heat exchanger consists of copper pipes with pressed-on aluminum fins and is heated by steam as the heati...
In stockShips in 1–3 business days
10945
Heat exchangers and pressure vessels transfer energy and store media under pressure. Both groups are safety-relevant — sizing, material and approval therefore belong together.
shukchok carries heat exchangers, heating coils, liquid receivers and related components for process, heating and analytical applications, stating capacity, connection and permissible working pressure.
Sizing needs flow rate, inlet and outlet temperature on both media plus the permissible pressure drop. Supply those four figures and you get a sound recommendation.
Transferable capacity depends on both sides. Sizing on the primary side alone regularly results in undersized exchangers.
More transfer area means more pressure drop. Check that the existing pump carries the additional resistance.
Copper, stainless steel and titanium behave completely differently towards chloride-bearing water. With aggressive media the material, not the design, is the cost driver.
Pressure vessels are subject to inspection depending on the pressure-volume product. Clarify which documentation acceptance requires before procurement.
Flow rate, inlet and required outlet temperature per medium plus the maximum permissible pressure drop. Those figures allow the required transfer area to be determined reliably.
That depends on pressure, volume and medium. Classification follows the applicable industrial safety regulation; the technical data per item provides the basis for assessment by your competent person.
Where the manufacturer offers gasket sets they can be ordered separately. We need type, plate count and year of manufacture — for older units a photo of the nameplate helps.
Card payment, Apple Pay and Google Pay are available immediately. Purchase on account and prepayment by bank transfer are in preparation for business customers and will be available shortly. If a card declines a larger amount, please contact us — we handle those orders individually.
7 items in this category are currently listed as available. There is no blanket delivery time — it depends on the item, and stock goods, made-to-order parts and special versions differ considerably. The figure that applies is stated on the product page.
Yes. Data sheets, dimensional drawings and manuals are — where provided by the manufacturer — filed under “Downloads” on each product and accessible without an account. If a document is missing we will supply it on request.
shukchok. Even where an external supplier lists and ships the product, shukchok remains the seller and contractual partner. Invoicing, payment processing, warranty and refunds all run through shukchok — you have exactly one point of contact.
Unused stock items can be returned within the statutory and contractual rules. Items made or configured to customer specification are excluded from return. Please register a return in advance so we can allocate the process.
The webshop for the industry
