EazyClean EC124 GEBRAUCHT

Used EazyClean EC 124 textile cleaning machine for hydrocarbon solvent (KWL) with a 24 kg load capacity. Closed cleaning system with vacuum distillation, activated carbon filtration and touchscreen control. The technical data match the new machine; please confirm the condition and equipment of this particular unit with us before purchase. Compatible with all alternative solvents, including KWL, INTENSE®, SENSENE®, HIGLO®, GREEN EARTH®, and SOLVONK4®.

Technical data

• Solvent: hydrocarbon (KWL); compatible with all alternative solvents, including INTENSE®, SENSENE®, HIGLO®, GREEN EARTH® and SOLVONK4®
• Load capacity: 24 kg
• Drum volume: 480 l
• Drum: Ø 100 cm, depth 61 cm
• Loading door: Ø 50 cm
• Cleaning speed: approx. 39 rpm
• Spinning speed: 735 rpm
• Tanks: working 90 l · clean 175 l · dirty 145 l
• Filter volume: 90 l
• Minimum solvent filling: 360 l
• Distillation capacity: 80–90 l/h
• Solvent recovery: 99.9%
• Control: touchscreen, freely programmable

Dimensions and weight

• Width × depth × height: 229 × 153 × 246 cm
• Net weight: 1,985 kg
• Operational weight: 2,257 kg
• Dynamic floor load: 2,948 N

Connections

• Compressed air: 1/4″, 5 bar
• Cooling water machine: 3/4″ · distillation: 3/4″
• Water pressure: 3–5 bar, max. 20 °C
• Steam: 1/2″ · condensate: 1/2″ · steam pressure 4–6 bar
• Electrical: 3× 400 V / 50 Hz
• Max. simultaneous power consumption: 22 A (steam heated) · 42 A (electrically heated)

Technology in detail

• Round distillation: the oval base of the V4A stainless steel steam chamber directs the heat to where the solvent sits — shorter distillation times, lower energy consumption, pure solvent after every batch and straightforward sludge disposal.
• Oscillating drum: shock absorbers take up the forces of the spin cycle. This permits 400 G centrifugal force, transmits almost no vibration to the floor and makes anchoring to the foundation unnecessary.
• Concentration measurement: the actual solvent concentration in the air chamber is measured, and the control system calculates the drying time from it — rather than assuming a flat figure.
• Touchscreen: every machine function and every cleaning programme can be created, edited and copied on screen. Three password-protected authorisation levels for operator, service and management.
• OES operator software: sensors and software guide the cleaning personnel through the process.
• Closed system: 99.9% solvent recovery, with correspondingly low consumption and less finishing work.

Equipment

• Two spin disc filters (bright and dark) and one activated carbon filter
• Fresenius measurement technology for concentration determination
• Stainless steel air chamber
• Cooling unit and solvent cooler
• Needle catcher
• Dispenser pump and impregnation
• Water separator
• Vacuum distillation
• Three stainless steel tanks
• Remote maintenance (optional)

Origin

Manufactured by EazyClean Technologies in Herten, Germany.