Piping and fittings decide whether a plant stays tight. The parts themselves are unspectacular — faults almost always arise at the interface: wrong thread, unsuitable material, over-tightened fitting.
by Spirax Sarco
Thermal capsule vent for automatic discharge of air and air-steam mixtures from steam lines and steam chambers of heat exchangers. The balanced capsule opens in the presence of air and closes automatically as soon as ...
In stockShips in 1–3 business days
12595
by Rovel
Automatic air vent Rovel VASFI with 1/4" connection for automatic venting of pipelines and containers. The housing is made of a grey light metal alloy, the connection has a brass insert with internal thread.Technical ...
In stockShips in 1–3 business days
10251
by eazytech
The safety ball valve with spring return is a manually operated ball valve made of nickel-plated brass, whose lever automatically returns to a defined position according to its design. A return spring is visible at th...
In stockShips in 1–3 business days
10280
by elobau
The suction lance is used for extracting liquids from containers in conjunction with dosing systems, for example for soap pumps or impregnation pumps in textile cleaning machines. The plastic tube is equipped with scr...
In stockShips in 1–3 business days
10232
by eazytech
Heavy-duty check valve with 3/4" female thread on both sides and a cone valve as the check element. The full-port design minimizes flow resistance during operation and prevents backflow of the medium when the flow rev...
In stockShips in 1–3 business days
10351
by eazytech
Brass check valve with 1 1/4" female thread on both sides, suitable for gaseous and liquid media. The design prevents the backflow of the medium when the flow direction in the pipeline reverses.Technical Features Type...
In stockShips in 1–3 business days
10728
by Pneumax
The Pneumax MB56 is a direct-acting pilot or solenoid valve in miniature design with 3/2-way function, normally closed (NC). It is used for pilot control of pneumatic main valves or for direct switching of small air v...
In stockShips in 1–3 business days
10142
by Miyawaki
The Miyawaki RE1 is a direct-acting steam pressure reducing valve that automatically reduces the upstream pressure of saturated steam to an adjustable downstream pressure without an external power supply. It is used i...
In stockShips in 1–3 business days
11354
by CEME
The CEME 9934 solenoid valve is a direct-acting 2/2-way solenoid valve from the Italian manufacturer CEME and is operated with a 24 V AC coil (type C72). The brass valve body has an additional hand-operated knurled wh...
In stockShips in 1–3 business days
10757
by M&M International
The solenoid valve is a direct-acting 2/2-way valve from the 2200 series by the Italian manufacturer M&M International. It switches water, oil, and air and is controlled by a 24V solenoid coil. The valve body is made ...
In stockShips in 1–3 business days
10279
by Miyawaki
The Miyawaki SD1-2 steam trap is a thermodynamic steam trap for draining steam lines, heat exchangers and other steam-carrying plant components. It quickly drains accumulating condensate and is suitable for all indust...
In stockShips in 1–3 business days
10281
by Caleffi
Automatic air vent Caleffi VALCAL without shut-off valve and without hygroscopic cap, for discharging accumulated air from heating and cooling water circuits. The housing is made of pressed brass and is nickel-plated....
In stockShips in 1–3 business days
12704
by eazytech
The G1/2" angle safety valve protects tanks and system components from inadmissible overpressure by automatically opening and discharging medium when the response pressure is reached. It is type-tested according to TÜ...
In stockShips in 1–3 business days
11151
Piping and fittings decide whether a plant stays tight. The parts themselves are unspectacular — faults almost always arise at the interface: wrong thread, unsuitable material, over-tightened fitting.
shukchok carries tubes, fittings, compression couplings, adapters and mounts for process and analytical technology. Material, nominal size and connection type are stated per item.
In gas analysis material choice counts twice: stainless steel and PTFE behave completely differently towards moist sample gas than galvanised steel, which can falsify readings through adsorption.
Stainless 1.4571 for aggressive media and sample gases, PTFE for highly corrosive applications and low adsorption, copper and brass for compressed air and water.
Parallel (G/BSPP) seals on a sealing face, tapered (R/BSPT, NPT) on the thread itself. Mixing the two gives a joint that appears to hold and fails under pressure.
Nominal size is a designation, not a dimension. Pressure-drop calculations need the actual inner diameter including wall thickness.
Compression fittings are tightened by turns from finger-tight, not by feel. Over-tightened ferrules cut into the tube and start leaking.
Not advisable. Zinc reacts with moist and acidic sample gases, which falsifies readings and causes deposits over time. Stainless steel or PTFE is the standard in analytical technology.
A G thread is parallel — the diameter stays constant along its length. NPT is tapered and visibly narrows. When in doubt use a thread gauge rather than trial and error; a wrongly started thread damages the mating part.
Cut-to-length is available through our suppliers. State length, tolerance and required edge treatment — for analytical lines also whether deburred and flushed delivery is needed.
Card payment, Apple Pay and Google Pay are available immediately. Purchase on account and prepayment by bank transfer are in preparation for business customers and will be available shortly. If a card declines a larger amount, please contact us — we handle those orders individually.
13 items in this category are currently listed as available. There is no blanket delivery time — it depends on the item, and stock goods, made-to-order parts and special versions differ considerably. The figure that applies is stated on the product page.
Yes. Data sheets, dimensional drawings and manuals are — where provided by the manufacturer — filed under “Downloads” on each product and accessible without an account. If a document is missing we will supply it on request.
shukchok. Even where an external supplier lists and ships the product, shukchok remains the seller and contractual partner. Invoicing, payment processing, warranty and refunds all run through shukchok — you have exactly one point of contact.
Unused stock items can be returned within the statutory and contractual rules. Items made or configured to customer specification are excluded from return. Please register a return in advance so we can allocate the process.
The webshop for the industry
