Track order·Sign in·
·

Steam, biogas and flue-gas parts for plant in and around Aarhus

Three media, three change intervals: what you keep inside tolerance is not stock — it is a diary. On shukchok the part sits beside every date in it.

Dampfentlüfter Spirax Sarco AV13, Typenschild mit PMA 16 bar, TMA 250°C, PMO 13 bar

Your rhythm on site

A cleaning run has a date. A quotation round does not.

This is the largest industrial municipality in the country, roughly 13,000 industrial employees, and its two dominant branches are food and mechanical engineering. That decides your shopping list: steam with a hygiene requirement on top, and small counts of many different parts against a bill of materials.

A dairy needs traps and reducing valves like any steam network, plus stainless sight glasses, elastomers that survive the cleaning cycle and fittings whose surface finish is not an afterthought — and it changes them inside a shutdown window, not when one fails.

Miss the window and you do not pay for the part twice. You pay for the window. So grade, operating limits and design stand at the position before you order, and the whole batch goes into one basket.

  • Every one of the 114 articles carries its grade, its limits and its design
  • Full-text search reaches the article number straight off a parts list
  • Order number and cost centre in the basket without an account, both on the invoice

The demand on the ground

Four operations in one catchment area, four different clocks

  • Dairy and food processing, in the city

    Steam, cleaning cycles and stainless process lines. The wear items are gaskets, sight glasses, strainers and the fittings between them — replaced in batches during a shutdown window.

  • A gas engine at the municipal treatment plant

    Gas from the digesters drives an engine that makes around 50 per cent more electricity than the plant consumes, after its own draw was cut by roughly 1 GWh a year. Wet, warm gas ahead of an engine is separator, filter element and sight glass duty.

  • A 700 MWe block on the coast north of the city

    It has burned wood pellets since its conversion and supplies more than 100,000 district heating customers. Pellet firing changes the flue gas, and with it the conditioning behind the instrument.

  • Waste-to-energy on the northern edge

    The energy park at Lisbjerg burns municipal waste for electricity and district heat. Continuous emission monitoring is the operating licence there, and it runs on consumables.

Dairy with an adjoining biomass boiler house: processing hall with a tanker bay, a battery of upright stainless steel silos, pellet silos with an inclined conveyor and a stack, farmland and a bay behind

Dairy steam, pellet flue gas and digester gas on one grid

Three different media, three change intervals — and one basket that takes all of them at once.

Universalfilter mit weißem Kunststoffgehäuse, transparentem Sammelbehälter mit sichtbarem zylindrischen Filterelement, Edelstahl-Haltewinkel mit zwei Befestigungslanglöchern und zwei Steckverschraubungen mit Beschriftung GAS-IN und GAS-OUT

What the marketplace changes

A plant being built in 2028 is a plant being maintained in 2027

shukchok is an open marketplace for industrial goods, and two parallel parts lists are exactly its case: Aarhus ReWater is due in 2028 and will replace the three existing treatment plants at Marselisborg, Viby and Åby. During that transition a sludge, gas and steam train is ordered for twice over — once for the old plant that has to keep running and once for the new one. Two parallel parts lists are exactly the case where re-ordering has to be quick.

And what a Danish round needs beyond the current range is not a dead end on a marketplace but a free slot: the manufacturer or distributor you would write to anyway lists here at no charge, keeps their prices and delivers through the same basket as the rest of the list.

  • Last time’s order moves into the basket again with a single click
  • Search terms such as kondensatpotte, damparmatur mejeri, målegaskøler and skueglas rustfri lead to the same table
  • Suppliers list without a listing fee, a monthly fee or a manual release

Before you order

Questions from a maintenance desk in Aarhus

Can I be invoiced in Danish kroner?
Prices are shown and charged in euros. Because the krone is held inside ERM II within ±2.25 % of a central rate of 7.46038 to the euro, the exchange exposure on a wear part is narrow enough to put straight into a calculation — and the free shipping threshold of 250 € applies here for the same reason, since the basket runs in euros.
Will I be charged the Danish 25 % rate?
The rule case for a Danish company is 0 %: an intra-EU supply to a business with a VAT number on file. The 25 % figure is the fallback where no valid CVR or SE number is present. One limit belongs with that answer — the number is checked for format, not against the VIES register.
Is there a Danish interface?
Eight interface languages are available and Danish is not among them, so you will be working in English or German; legal texts and PDFs exist in German and English. The specification table is identical in every language, and an article number reads the same in all of them.
We manufacture parts of this kind ourselves. Can we sell them here?
Yes, and the demand above is your catchment area. Bring your range and keep your prices; there is no listing fee, no monthly fee and no manual release before a product goes live. The platform stays the seller and contracting party and handles the checkout, the invoice and the payment.

Two ways in

Put a whole survey list into one basket

Several manufacturers, one checkout, one payment — with your order number and cost centre on it. And if you make these parts: the shelf beside them is free.

The webshop for the industry