Pneumatics and hydraulics are the muscles of every production and process plant. Cylinders, valves, fittings, air preparation and hoses interlock so closely that a single mis-dimensioned component slows the whole chain.
by eazytech
The push-in elbow fitting is a 90° quick-release fitting for compressed air hoses with an external hexagon and O-ring seal. The hose is secured by simply pushing it in and can be released again with a single movement....
In stockShips in 1–3 business days
10448
by MAROS Engineering
The angle seat valve (steam valve) is a pneumatically operated valve in an angle seat design (Y-pattern) for steam and high-temperature applications. The valve body is made of brass, and it is actuated by an attached ...
In stockShips in 1–3 business days
12339
by MAROS Engineering
The angle seat valve (steam valve) is a pneumatically operated valve in an angle seat design (Y-shape) for steam and high-temperature applications. The valve body is made of brass, and it is actuated by a mounted pneu...
In stockShips in 1–3 business days
10290
by MAROS Engineering
Pneumatically actuated solvent valve in straight (inline) design with 3/4" internal thread, in normally closed (NC) version. The actuator housing is finished in aluminum color; the medium-contacting valve body is made...
In stockShips in 1–3 business days
10257
by CEME
The CEME 9934 solenoid valve is a direct-acting 2/2-way solenoid valve from the Italian manufacturer CEME and is operated with a 24 V AC coil (type C72). The brass valve body has an additional hand-operated knurled wh...
In stockShips in 1–3 business days
10757
by M&M International
The solenoid valve is a direct-acting 2/2-way valve from the 2200 series by the Italian manufacturer M&M International. It switches water, oil, and air and is controlled by a 24V solenoid coil. The valve body is made ...
In stockShips in 1–3 business days
10279
Pneumatics and hydraulics are the muscles of every production and process plant. Cylinders, valves, fittings, air preparation and hoses interlock so closely that a single mis-dimensioned component slows the whole chain.
shukchok carries both the actuating elements and the unglamorous parts that actually cause the failure: push-in fittings, one-way flow controls, service units and seal kits. Every item states thread size and operating pressure.
Particularly relevant for maintenance teams: we deliberately list individual components, not just complete assemblies. Anyone who only needs the rod seal should not have to replace the entire cylinder.
The permissible operating pressure is the design figure, not the burst pressure. Under pulsating load the operating pressure should stay well below the nominal value.
G (BSPP), R (BSPT) and NPT look similar and are not compatible. The wrong thread appears to seal and then pulls out under load.
Valves and cylinders answer moist or oily compressed air with corrosion and sticking seals. Filters, water separators and dryers are part of the design, not an accessory.
Flow rate depends on the inner diameter. For push-in fittings the outer diameter is what counts — state both when ordering.
Push-in fittings are designated by hose outer diameter. An 8 mm fitting suits a hose with 8 mm outer diameter regardless of wall thickness. The inner diameter determines the achievable flow rate.
No. Hydraulics work at a multiple of the pressure and with oil-resistant materials. Pneumatic components are rated for neither.
Wherever the manufacturer offers seal kits we list them separately. Tell us the cylinder type and bore — a matching kit can usually be sourced even for older series.
Card payment, Apple Pay and Google Pay are available immediately. Purchase on account and prepayment by bank transfer are in preparation for business customers and will be available shortly. If a card declines a larger amount, please contact us — we handle those orders individually.
12 items in this category are currently listed as available. There is no blanket delivery time — it depends on the item, and stock goods, made-to-order parts and special versions differ considerably. The figure that applies is stated on the product page.
Yes. Data sheets, dimensional drawings and manuals are — where provided by the manufacturer — filed under “Downloads” on each product and accessible without an account. If a document is missing we will supply it on request.
shukchok. Even where an external supplier lists and ships the product, shukchok remains the seller and contractual partner. Invoicing, payment processing, warranty and refunds all run through shukchok — you have exactly one point of contact.
Unused stock items can be returned within the statutory and contractual rules. Items made or configured to customer specification are excluded from return. Please register a return in advance so we can allocate the process.
The webshop for the industry
