Sample gas coolers lower the dew point of the sample in a defined way before it reaches the analyser. Without this step water condenses inside the instrument — with shifted readings, damaged cells and expensive downtime as the result.
by eazytech
The universal filter pre-assembled is a fully assembled particle filter with a mounting bracket for gas treatment. The PTFE filter element with a pore size of 2 µm separates solid particles from the gas flowing throug...
In stockShips in 1–3 business days
1PFEPF0002
by eazytech
The PTFE filter insert is a porous filter element for the filter housing of gas coolers, used to separate particles from the sample gas stream prior to further analysis. The porous PTFE structure is chemically inert a...
In stockShips in 1–3 business days
1PFGGK0003
by eazytech
The O-ring serves as a sealing element on the gas cooler and is used as a spare part for maintenance work in sample gas conditioning. It is made of FPM (fluorine rubber), which is characterized by high chemical and th...
In stockShips in 1–3 business days
13160054
by Fresenius Umwelttechnik
The RCI 700 gas cooler is used for the parallel conditioning and drying of two sample gas streams before analysis. The 19" plug-in housing is suitable for installation in swing frames or cabinets and cools both gas pa...
In stockShips in 1–3 business days
RCI700000000
by Fresenius Umwelttechnik
The gas cooler RCI 500 is used for conditioning and drying of sample gas before analysis. The 19" plug-in unit is suitable for installation in swing frames or cabinets and cools the gas flow via a heat exchanger made ...
In stockShips in 1–3 business days
RCI500000000
by Fresenius Umwelttechnik
The gas cooler RCI 100 is used for conditioning and drying sample gas before analysis. In the wall-mounted housing, a heat exchanger made of Duran glass cools the gas stream to a regulated block temperature; resulting...
In stockShips in 1–3 business days
RCI100000000
Sample gas coolers lower the dew point of the sample in a defined way before it reaches the analyser. Without this step water condenses inside the instrument — with shifted readings, damaged cells and expensive downtime as the result.
shukchok carries compressor and Peltier coolers plus accessories such as heat exchanger blocks, condensate drains and peristaltic pumps. Cooling capacity, target dew point, number of gas paths and connection type are stated.
Three figures matter for sizing: flow rate, inlet dew point and ambient temperature at the installation site. Forgetting the last one is the classic reason for undersized cooling capacity.
The heat to be removed rises with flow rate and inlet humidity. Saturated gases from biogas plants demand considerably more than dry process air.
Reproducible readings come from the most constant dew point, not the lowest. Fluctuations in the cooling block feed straight through to the measuring signal.
The condensate has to leave reliably — via peristaltic pump or automatic drain. A flooded cooling block carries droplets into the sampling train.
Glass, stainless steel and PVDF behave differently towards acidic sample gases. With H₂S or HCl the material decides the service life.
Peltier coolers are compact, low-maintenance and ideal for smaller flow rates. Compressor coolers deliver more capacity and cope better with high inlet humidity and warm surroundings. From roughly 250 l/h or with saturated gases the compressor cooler is usually the more robust choice.
3 to 5 °C is customary. Going lower brings hardly any measuring benefit but raises the risk of icing in the heat exchanger and the energy demand.
The heat exchanger itself is low-maintenance. What needs regular checking is the condensate drain, the peristaltic pump tubing and the filter stage ahead of it — these wear within months depending on duty.
Card payment, Apple Pay and Google Pay are available immediately. Purchase on account and prepayment by bank transfer are in preparation for business customers and will be available shortly. If a card declines a larger amount, please contact us — we handle those orders individually.
7 items in this category are currently listed as available. There is no blanket delivery time — it depends on the item, and stock goods, made-to-order parts and special versions differ considerably. The figure that applies is stated on the product page.
Yes. Data sheets, dimensional drawings and manuals are — where provided by the manufacturer — filed under “Downloads” on each product and accessible without an account. If a document is missing we will supply it on request.
shukchok. Even where an external supplier lists and ships the product, shukchok remains the seller and contractual partner. Invoicing, payment processing, warranty and refunds all run through shukchok — you have exactly one point of contact.
Unused stock items can be returned within the statutory and contractual rules. Items made or configured to customer specification are excluded from return. Please register a return in advance so we can allocate the process.
The webshop for the industry
